The M-25 is a pass through filter unit delivers 2,500 CFM with ¾ Hp blower through disposable bag filters that can be selected on various efficiencies. This units are used in smaller spaces, or multiple units together, to establish air flow patters to capture welding fumes, diesel exhaust, bondo dust metal grinding and more.
The M-30 unit is designed as a T-Flow design dual inlet and a single smaller outlet for increased throw capability The airflow design is to be utilized with a push-pull design method. Primary filter media disposable bag type either 65% or MERV 15. The unit is powered by a ¾ Hp blower that delivers 3,000 CFM
This ceiling mounted electronic air cleaner effectively removes tobacco smoke, airborne viruses, nuisance dust and pollen. This unit hangs down from the ceiling 12”, draws air in through the bottom and returns clean filtered air back into the room in four directions. The clean air delivey rate is 900- 1,250 CFM.
The F-33 is a pass through electrostatic unit that delivers 1,250 CFM. This can be for general background cleaning or ducted source capture for fine dusts, smoke, coolant mist, soot and other light dusts.
The F-62 electronic air cleaner uses the coanda air flow pattern where air is drawn up through the bottom of the unit, filtered and sent back into the room in all four directions. Ideal for welding smoke, coolant smoke where there is a tendency for the smoke to rise. The unit is powered by a ¾ hp direct drive motor, delivers up to 2,500 CFM
This industrial sized electrostatic air cleaner can be used for ducted or ambient air cleaning applications. Primary contaminates include welding fumes, coolant mist, injection molding and machining smoke. The air cleaner uses washable electronic filters that can filter 5,000 to 6,000 CFM.
This media air cleaner is effective on smoke, vapors, VOC’s, fine dusts, soot and mists. This versatile multistage air cleaner can be fitted with pleated high efficient microglass media, bag filters, carbon filters or a combination of all. The unit can be ordered in 1HP, 2Hp or 3Hp depending on airflow requirements and filter selection. A specialist can assist in selecting the media and horsepower requirements based on your application.
This industrial air cleaner uses a front end load 85% efficient pocket bag filter and delivers 1,200 – 1980 CFM. The filter media used is well suited for wood shops, body shops and metal shops with airborne dusts know to be larger in particle size. The air cleaner is powered by a ¾ Hp direct drive motor, uses magnahelic gauge for filter monitoring and has a 10’ power plug.
This industrial sized air cleaner is for larger areas and delivers 4,500 – 6,000 CFM depending on filter selection. Powered by a 3Hp or 5Hp belt drive blower welding fumes, warehouse dust, pollen, coolant mist, grinding dust and smoke are removed by multistage prefilters and high efficient primary filter unit. A specialist can survey your facility to determine equipment layout, electrical controls and filter selection
The X-11 electrostatic air cleaner effectively removes sub-micron particles. Tobacco smoke, nuisance dust and airborne viruses are removed from the airstream after receiving a 10,000 volt electrical charge. Particles are collected on removable and washable filters. This unit is designed to rest inside a 2x4 drop ceiling and sits flush for a clean finished look. The air cleaner delivers 500 – 1250 CFM with a coandra air pattern so air is constantly recirculated back to the unit.
This air cleaning unit is designed to convert any room to a negative pressure isolation room. The blower unit is variable volume control for 115 CFM on the low side to 1,000 CFM on the high side. The filters are 85% efficient prefilter with a true 99.99% HEPA final filter.
Easy to install and maintain, the Industrial Maid Horizontal Vent Hood is built for handling oily welding applications. The hood is quiet, cost-effective and doesn’t require compressed air for cleaning. The hood operates with a three-stage filtration, including a baffle spark arrestance filter, a Merv 8.4” pleated filter and Merv 15 multi-pocket main bag filter. Horizontal hoods are available in a variety of sizes for your convenience.
Easy to install and maintain, the Industrial Maid Vertical Vent Hood is built for handling oily welding applications. The hood is quiet, cost-effective and doesn’t require compressed air for cleaning. The hood operates with a three-stage filtration, including a baffle spark arrestance filter, a Merv 8.4” pleated filter and Merv 15 multi-pocket main bag filter. Vertical hoods are available in a variety of sizes for your convenience.
The GVMC unit is a pleated media unit that utilizes smart controls to provide a consistent airflow as filters load of. The filters can be monitored remotely and can be manually cleaned. Thes units are ideal for large welding facilities where source capture is not possible. The provide the most SqFt of media than any other unit and deliver 2,500 to 5,000 CFM depending on the model selected.
The SCA model is the perfect choice for applications where source capture is impractical. Installed above the plant floor, this continuous cleaning dust collection system draws fumes, dust and other airborne contaminants from the workspace into filters, and recirculates clean air back into the plant. As a result, workers are able to benefit from healthy breathing conditions as well as unrestricted movement in their workspace.
For applications requiring dust and smoke removal right at the source, select the SCB model. This system features two lightweight, counterbalanced swing arms. Unique extension arm mounting plates are positioned for maximum and equal reach, allowing one unit to be centrally located between workstations for ultimate source capture in each area.